Residential gas regulating cabinets

Residential gas regulating cabinets


Residential gas regulating cabinets GRPSh-10(25) based on gas pressure regulators EKB, RF, FE are produced at our enterprise. GRPSh-10, GRPSh-25 - gas regulating cabinets of residential use are designed to reduce medium and high gas pressure to the low one and both automatically maintain it independently from the changes of inlet pressure and gas flow and switch-off the gas supply if there is an emergency increase or decrease of the output pressure beyond of allowable set values.

Exforma's GRPSh are the metal cabinets painted with a process piping inside including the gas pressure regulator, ball valves, pressure gauge as well as upon additional customer's requirements there can be installed fine mesh filter, gas flow metering point, electrical heating and corundum refinement of the cabinet's body for northern versions.

Residential gas regulating cabinets


Residential gas regulating cabinets GRPSh-10(25) are manufactured according to Russian standard GOST 15150 and successfully operated in climatic conditions from -40 to +40°C. GRPSh can be manufactured with operating temperature to -60°C.

The point is a cabinet-type where the valve and regulator are situated. There is either gas pressure regulator RF or EKB with built-in safety shut-off valve, filter and independent safety relief valve. The gas enters through the inlet pipeline valve then goes through the inlet pipeline to the regulator reducing the gas pressure to the set value, after that gas flows to the consumer. To measure input and output pressure there are unions for gauge connection.

Moreover, our company develops and manufactures domestic gas control points with two reduction lines for one or two consumers of natural gas.

Here you can find some products released in 2014.

Residential gas regulating cabinets


Moreover, our designers have developed budget-friendly project of cabinet with a minimum set of components that provides its low price and high demand.
Also Exforma has a solution for customers who is concerned with gas supply safety. We have designed and manufactured the domestic GRPSh with main and backup reduction lines with two-stage gas refining from mechanic impurities that prolongs lifetime of gas pressure regulators and reduces maintenance costs.
Besides, our enterprise manufactures GRPSh-10-EK with gas-flow metering unit. Since 2014 Exforma has mastered production of GRPSh-10MSbased on RDGK-10 and RDGK-10M regulators.